speed.sg

Speed below your plan? What to check first

Why your fibre broadband test shows less than your plan's headline speed, and the checks to do before contacting your provider.

0 Mbps
Press Start to test. Nothing runs until you do.
This device is connected by
Download
—
Upload
—
Latency
—
Jitter
—

"Up to" speeds and typical speeds

Plans are sold with a headline "up to" speed. Providers in Singapore also publish typical speed ranges for their plans; our provider pages link to them. Results below the headline, especially over Wi-Fi, are normal.

Checks, in order

  1. Test with a cable, not Wi-Fi, with other devices idle.
  2. Look for a 1 Gbps or 2.5 Gbps limit. A result stuck near 940 Mbps means something in the path runs at 1 Gbps: the computer's port, the cable or the router port. Near 2.35 Gbps means a 2.5 Gbps part.
  3. Check the router's internet (WAN) port. Many routers have a 1 Gbps WAN port even when the plan is faster.
  4. Restart the fibre terminal (ONT) and router.
  5. Test at different times. Fine in the morning but slow at 9 pm points to congestion; slow all the time points to equipment or the line.
  6. Contact your provider with your wired results and times. Your history under each result keeps them on this device.

Multi-gigabit plans

On 5 Gbps and 10 Gbps plans, the browser itself is usually the limit: web-based tests, including ours, typically reach about 2–6 Gbps depending on the browser and computer. Reaching higher needs a computer with a 10 Gbps port and dedicated test software. More on this.